LD95565 10000mAh 3.7V

The LD95565-1S2P is a high-energy-density, long-lasting lithium-ion battery pack by Lan Dazzle. With a 10000 mAh capacity, 3.7V nominal voltage, and 37 Wh energy, it is designed for smart door locks and other compact devices. This battery offers reliable power, a compact size, and a durable design, ensuring consistent performance for modern security applications. Lan Dazzle also provides customized solutions, technical support, and high-quality manufacturing for all battery needs.

Description
Specs

LD Series Lithium-Ion Battery Pack Solutions for Smart Security Systems

Comparative Technical Specifications

Model	LD95565-1S2P	LD6058100-1S3P	LD854050-2S1P	LD18650-1S2P
Cell Chemistry	Li-Ion NMC	Li-Ion LCO	LiFePO4	Li-Ion NMC
Configuration	1S2P	1S3P	2S1P	1S2P
Nominal Voltage (V)	3.7	3.7	6.6	3.7
Capacity (mAh)	10,000	6,500	2,200	5,000
Energy (Wh)	37.0	24.05	14.5	18.5
Max Continuous Load	5A	3A	10A	5A
Dimensions (mm)	20.0×56.0×65.5	10.0×58.0×100	50×40×8.5	65.5×20.0×18
Cycle Life*	500 cycles	300 cycles	2,000 cycles	800 cycles
Full Charge Voltage	4.2V (±0.05)	4.35V	7.2V	4.2V
Self-Discharge Rate	<3%/month	<5%/month	<1%/month	<3%/month
Protection Features	OCP/OVP/SCP	OVP/SCP	OCP/OVP/OTP	Full Suite
Warranty Period	12 months	12 months	24 months	12 months

*Retains ≥80% capacity after specified cycles (25°C, 0.5C discharge, DoD=80%)
Protections: OCP=Over-current, OVP=Over-voltage, SCP=Short-circuit, OTP=Over-temperature

LD95565-1S2P Lithium-ion Battery Pack: Optimized Power Solution for Smart Door Locks

I. Technical Specifications

Cell Architecture
- 2 parallel 3.7V Li-Ion pouch cells (1S2P)
- Precision-matched cell groups (capacity variance <1%)
- Integrated PCM with ±0.5% voltage sensing accuracy
Performance Validation
- Tested under EN 62133:2017 safety requirements
- 500-cycle aging test @1C/1C (25°C±2°C, 40%-80% SoC cycling)
- Low-temperature performance: Operates down to -20°C (<50% rated capacity)
Mechanical Design
- UL94 V-2 flame-retardant ABS casing
- IP53 protection (dust/water resistance)
- Snap-fit terminal design (0.8mm pitch spring contacts)

II. Compliance & Certifications
Lan Dazzle can assist in obtaining:

UN 38.3: Transportation safety certification
IEC 62133-2: Cell safety standard
RoHS/REACH: Environmental compliance
EN 300 328: EMC compliance for EU markets

III. Application-Specific Engineering

Door Lock Integration
- Supports 12-36 month standby time (typical smart lock current: <15μA in sleep mode)
- Low-voltage cutoff preset at 3.0V (±0.1V) to prevent lock malfunction
Safety Protocol
- Three-stage protection protocol:
  1. Primary shutdown at 4.25V/2.75V (OVP/UVP)
  2. Secondary MOSFET isolation at 4.30V/2.65V
  3. Permanent fuse blow at 4.35V/2.50V

Comparative Benchmark

Metric	LD95565-1S2P	Competitor A (1S2P)	Advantage
Energy Density	370 Wh/L	320-340 Wh/L	+9%
Cold Start (-10°C)	85% capacity	60-70% capacity	+25%
Short-circuit Recovery	Auto-reset	Manual reset	100% automatic

Implementation Guidelines

Storage Conditions
- Recommended state of charge: 30-50% (long-term storage)
- Temperature range: 15°C-25°C (non-operational)
Integration Protocol
- Device PCB should include 0.5A fuse in series with battery input
- Minimum 1mm clearance from heat sources (>45°C)
End-of-Life Criteria
- Replace when capacity drops below 60% of initial rating
- Return for recycling via certified partners

Service Commitments

Regulatory Support
- Pre-compliance testing documentation (EMC/Safety checklists)
- Material declaration (IMDS/SCIP support)
Custom Solutions
- Voltage adaptation (3.0-4.35V programmable cutoff)
- Connector options (JST-2P, Molex PicoBlade)
Production Scalability
- MOQ: 1,000 units (standard), 500 units (customized)
- Lead time: 18 business days (±3 days)